PREMIUM CAR CHECK

Mileage: 25,618 miles

Advisory Notices: No Advisory Notices

Failure Notices: No Failure Notices

Mileage: 21,799 miles

Advisory Notices:
Wheel alignment slightly misaligned (2.4 (a))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Drive chain slightly loose (6.1.7 (c) (i))
Front Brake pad(s) close to minimum limit (1.1.13 (a))
Rear Tyre worn close to the legal limit (5.2.3 (e))

Failure Notices:

Mileage: 21,727 miles

Advisory Notices:
Front Brake pad(s) close to minimum limit (1.1.13 (a))
Rear Tyre worn close to the legal limit (5.2.3 (e))
Drive chain slightly loose (6.1.7 (c) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Failure Notices:
Front Brake lever has insufficient reserve travel (1.1.2 (a))
Offside Front Position lamp not working (4.2.1 (a))
Front Brake lever is bent and the brake cannot be readily applied (1.1.2 (d))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Wheel alignment incorrect which adversely affects the steering (2.4 (a))

Mileage: 16,793 miles

Advisory Notices:
Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Wheel alignment slightly misaligned (2.4 (a))
Rear Wheel bearing has slight play (5.1.3 (a) (i))

Failure Notices:

Mileage: 16,793 miles

Advisory Notices:
Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))
Rear Wheel bearing has slight play (5.1.3 (a) (i))
Front bolt missing front fender
Wheel alignment slightly misaligned (2.4 (a))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Failure Notices:
Drive chain excessively loose (6.1.7 (c) (i))
Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a))
Front Direction indicator not working (4.4.1 (a) (ii))
Fuel cap ineffective (6.1.3 (b) (i))
Front Position lamp not working (4.2.1 (a))
Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e))